Wholesale vape cartridges come in 0.5 mL and 1.0 mL reservoir capacities with 1.0mm to 2.0mm oil intake apertures. Borosilicate glass, polyresin, and poly tanks give pack technicians the clearance needed to fill distillate, live resin, or rosin without overflowing internal seals.

• 0.5 mL & 1.0 mL Glass Tanks: Borosilicate glass barrels paired with EZ Click ceramic, poly, or glass plus cores.
• 1.0mm Aperture Ports: Sized for thinner, terpene-rich live resins and liquid diamonds to prevent flooding.
• 2.0mm Aperture Ports: Sized for high-viscosity raw distillates to prevent dry hits and coil starvation.

EZ Click ceramic and poly mouthpieces snap down using a benchtop arbor press and alignment jig to seal filled tanks in a single press stroke. Applying even vertical pressure seats the internal silicone O-ring flush against the glass post, creating a tamper-evident seal that prevents top leaks during shipping.

Review capping instructions on our AVD Filling and Capping Directions Guide to set correct benchtop press parameters.

Capping cartridges immediately after filling forces oil into the internal ceramic core while leaving proper expansion headspace in the tank. Keeping filled trays upright during initial coil absorption stops oil from migrating into the central airflow chimney during transport and vault storage.

Review transportation protocols on our AVD Headspace, Transportation and Cart Flipping Guide to prevent leakage during LTL freight shipping.

Directly printed CA universal symbols on glass and poly tanks satisfy state visual warning rules directly on the hardware body. For final dispensary exit compliance, cartridges inside clamshells or paper boxes slide into certified child-resistant exit packaging.

Cross-reference state exit rules in our State Compliance Regulations Guide to confirm local exit bag requirements.

Cartridges ship packed in protective foam tray grids that keep individual glass tanks separated during freight transit. Storing master cartons flat in climate-controlled cleanroom staging areas keeps internal ceramic cores, rubber gaskets, and 510 threads free of ambient dust before filling runs.