Event Displays.
Built for Impact.
Heavy-duty trade show frames, dye-sublimated textiles, and rigid counter displays built for repeated use. Free pre-press support and strict Pantone matching ensure every graphic arrives retail-ready.
Popular Formats
Retractable Banner Stands
Anodized aluminum cassettes with anti-curl 13 oz Matte vinyl for fast indoor setups.
Tension Fabric Backdrops
32mm aluminum tube frames wrapped in 260 gsm wrinkle-free stretch polyester for booth walls.
Custom Pop-Up Canopies
40mm hex aluminum frames with weatherproof 600D PU-coated polyester tops for outdoor activations.
Fitted Stretch Table Throws
Contour-stitched 240 gsm poly-spandex covers with reinforced leg pockets for glare-free vendor tables.
Custom Feather Flags
Tear-resistant 115 gsm knitted poly-mesh sails on carbon-composite poles for high-wind directional signage.
Corrugated Counter Displays
Die-cut E-flute and B-flute corrugated structures with gloss UV lamination for retail counters.
Silicone-Edge Lightboxes
Extruded aluminum frames with internal LED edge-lighting and backlit graphics for high-contrast booths.
A-Frame Sidewalk Signs
Weighted HDPE or steel frames with UV-printed 4mm Coroplast inserts for storefront traffic.
Popular Features
Graphic-Only Replacements
Swap-out fabric pillowcases, vinyl roll-up inserts, and canopy tops built for your existing frames.
Complete Booth Kitting
Bundle canopies, table throws, and flags into single-SKU pallets or padded rolling cases.
Heavy-Duty Ballast Hardware
Anchor outdoor setups with steel footplates, auger ground stakes, and interlocking PVC water bags.
Clamp-On LED Lighting
Mount low-voltage, UL-listed LED stem lights directly onto tubular backdrops and retractable frames.
Form meets Function.
260 gsm Tension Knit Polyester
Two-way stretch fabric takes dye sublimation with zero light bleed or camera glare.
600D PU-Coated Oxford Canvas
Waterproof, UV-inhibited weave resists tearing, fading, and mildew during multi-day outdoor exposure.
13 oz Smooth Matte Blockout PVC
Grey-backed, anti-curl PET/PVC composite hangs completely flat inside spring rollers without edge cupping.
4mm Coroplast & 350 gsm CCNB
Rigid corrugated plastic and clay-coated board hold structural die-lines under heavy product loads.
Eco-Friendly Options
100% Post-Consumer rPET Fabric
Knitted from recycled bottles to match virgin polyester tension and color vibrancy.
FSC-Certified Corrugated Board
Responsibly harvested E-flute and B-flute kraft board is 100% curbside recyclable after campaigns.
Zero-VOC Water-Based Disperse Inks
OEKO-TEX certified dye-sublimation inks eliminate hazardous solvents while maintaining deep Pantone saturation.
Modular Anodized Aluminum
Corrosion-resistant tubing and snap-button joints built for hundreds of installs and interchangeable skins.
Functional Add-Ons & Secure Closures
Fire Marshal Compliance
Outdoor Wind Engineering
Transport & Protection
Retail & Logistics Prep
Technical Specifications
Substrates
Decoration
Finishes
Print & Finish
Heat-Transfer Dye Sublimation
Infuses dye directly into polyester fibers for washable graphics that never crack when folded.
Direct-to-Substrate UV Flatbed
Cures high-opacity CMYK+White UV inks instantly onto corrugated boards and rigid plastics.
Silicone Edge Keder Finishing
Sews flexible PVC strips onto fabric edges for drum-tight insertion into recessed aluminum frames.
Anti-Glare Matte Lamination
Applies a non-reflective film over roll-up banners and signs to block flash photography glare.
Weatherproof DWR & UV Coating
Treats canopies and flags with water repellents and UV blockers for 1,000+ sun hours.
CNC Oscillating Knife Routing
Cuts custom contour shapes, interlocking slots, and fold scores into corrugated board and plastic.
Heavy-Duty Webbing & Grommets
Reinforces high-stress flag headers and banner hems with 1-inch nylon webbing and brass grommets.
Pantone (PMS) Spot Calibration
Matches corporate brand colors across textiles, vinyls, and boards using spectrophotometer-verified ink profiles.
Event Displays. FAQ
What is the difference between soft enamel and hard enamel pins?
Soft enamel pins feature raised metal die lines with recessed color wells for a textured, dimensional feel at a lower cost point. Hard enamel pins are overfilled and polished completely flat so the enamel sits flush with the metal lines, delivering a smooth, jewelry-grade finish built for heavy wear.
Are your die-cut vinyl stickers weatherproof and dishwasher-safe?
Yes, our die-cut and kiss-cut decals are printed on thick 4.0 mil polymeric cast vinyl and sealed with a protective UV laminate. This barrier shields the ink from sun fading, outdoor rain, scratches, and high-heat dishwasher cycles on water bottles and coolers.
Should I choose embroidered, woven, or 3D PVC patches for my brand?
Choose embroidered patches for a classic, raised-thread heritage look on bold logos. Select woven patches if your artwork contains fine small text that thick embroidery thread cannot capture, or opt for molded 3D PVC patches if you need a waterproof, wipe-clean rubber badge for outdoor gear.
What are the minimum order quantities (MOQs) for custom promotional swag?
Our minimum order quantities are structured for flexibility, starting at 100 to 250 units for custom enamel pins, patches, lanyards, and molded PVC keychains, and 500 units for die-cut stickers, coasters, and display trays. High-volume wholesale tiers are available for national retail rollouts.
Can custom enamel pins, patches, and keychains be packaged for retail sale?
Yes, we turn promotional items into shelf-ready retail merchandise by adding custom-printed paperboard backer cards and individual poly header bags. We can also pre-apply UPC or FNSKU barcodes and hang holes so your items arrive ready for checkout pegs and e-commerce fulfillment.
How do you guarantee exact brand color matching across different swag materials?
We use the Pantone Matching System (PMS) to mix liquid enamels, PVC elastomers, screen-printing inks, and sublimated fabric dyes. Referencing your exact PMS color codes ensures your brand colors remain 100% consistent across metal pins, rubber bar mats, and vinyl stickers.
Are your custom bar mats, trays, and promotional items Prop 65 and food-safe compliant?
Yes, our promotional hardware is manufactured using lead-free zinc and brass alloys, phthalate-free soft PVC, and non-toxic inks that comply with California Prop 65 and CPSIA standards. Our melamine trays and BPA-free silicone counter mats are engineered specifically for commercial hospitality and food-contact environments.
What is the difference between die-cut and kiss-cut stickers?
Die-cut stickers are cut cleanly through both the vinyl layer and the paper backing to the exact silhouette of your artwork. Kiss-cut stickers are cut only through the top vinyl layer while leaving a wider square or rectangular paper backing intact, making them easier to peel and allowing extra space to print social handles or QR codes on the border.
What artwork file formats are required to create custom 3D molds and die-cut shapes?
Vector files in Adobe Illustrator (.AI), .EPS, or vector .PDF format with all fonts converted to outlines are required for precision die-cutting and 3D mold tooling. If you only have a flat raster image (.PNG or .JPG), our in-house pre-press design team can vectorize your artwork and generate custom cutlines and 3D digital proofs before production.
Ready To Bring Your Brand To Life?
Full circle packaging solutions in-house! We'll get you off the starting line and see you through the finish!